57
56
6. Press
STO
.
• The phone will beep and the
message -
ALARM
- will be
displayed at the appointed time.
• To stop a beep tone, open/ close
the cover, or press any button.
Otherwise the beep tone will
stop automatically after 3
minutes.
1. Press:
◆
FCN
followed by
◆
Numeric buttons
3
and
2
.
2. Press numeric button
2
to choose
‘
Release
’.
3. Press
or
to choose
YES
.
4. Press
STO
.
To Release Alarm
If you turn the phone off, then on when alarm is set:
If the alarm time is appointed...
Alarm setup...
At the current time mode
Remains to be on.
Using time duration (in minute) mode
Cancels.
DTMF Dialing
This feature allows you to utilize additional phone
services, such as accessing an alternate long
distance network, signaling pager, or banking by
phone. The following two features will make it
easier to send DTMF tone.
If
’SILENT’
is displayed, turn on the keytone. See ‘Turning
Tones On and Off’ on page 45.
Using Memory
If you want to use this feature, store the numbers
(ID code, credit card number, etc) in a memory
location.
1. After you call the service, press
RCL
when the service asks to enter the
DTMF code.
2. Enter the location number to be
dialed.
Example:
◆
Credit card number
◆
Password
Result:
The number stored in the
location is displayed.
3. Press:
◆
FCN
followed by
◆
SEND
SCH-670 (46-73) 11/23/98 3:30 PM Page 12