Samsung SCH-110 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 47

Samsung SCH-110 Скачать руководство пользователя страница 42

82

83

Before contacting an authorized service center,
perform the following simple checks. They may
save you the time and expense of an unnecessary
service call.

Troubleshooting

NOSVC is displayed in the display.

Make sure you are in the service area.
If you have changed the service system, wait for about 2
minutes.
Make sure you have chosen correct service system mode
Sometimes, NOSVC indication appears briefly. It is normal.

Beep tone sounds when you place a call.

The call has not gone through.

When beep tone sounds, press

SEND

again so the number

is redialed automatically.
To cancel automatic redial, press

END

.

Ringer bell does not sound and receiving lamp flickers.

You have set the phone to the lamp mode.

LOCKED is displayed and you cannot make a call.

The phone is locked.

Enter your lock code. (Default:0000)
If you forgot the lock code, consult with the service center.

Battery usage time is different with that of this manual.

If you use analog or digital mode alternately, the usage time
may be reduced.
You may be recharging your battery too frequently or before it
is completely discharged (see Battery Safety Precautions on
page 78).
Always store batteries in a cool, dry place.

The phone does not turn on, even though the battery is full.

Remove battery from the phone and reattach it.

Miscellaneous

Miscellaneous

Troubleshooting, continued on next page.

Nothing is displayed

Check that the battery has been charged and installed
correctly.
Check that the phone has been switched on (

PWR

button

pressed for more than one second).

You have entered a phone number but the phone is not
dialing it.

Have you pressed the

SEND

button?

Is the cellular phone service currently available (

SVC

displayed)?
Are you accessing the right cellular network (if the phone is
programmed for dual network use)?

Your party cannot reach you

Is your phone switched on (

PWR

button pressed for more

than one second)?
Are you accessing the right cellular network (if the phone is
programmed for dual network use)?

Your party cannot hear you speaking

Have you switched off the microphone (MUTE displayed)?
Are you holding the phone close enough to your mouth? The
microphone is located at the bottom of the phone.

The phone starts beeping and flashes on the display

The battery is insufficiently charged. Replace the battery and
recharge it fully until the lamp on the charger turns green.

Troubleshooting, continued on next page.

«
...
40
41
42
43
44
...
»

Содержание SCH-110
















































Отзывы:

Нет отзывов