COLOR DOME CAMERA
User Guide
30
COLOR DOME CAMERA
User Guide
31
Select a desired EXIT mode using the Function Setup switch depending on the camera
purpose.
- SAVE
: Save the current settings and exit the MAIN SETUP menu.
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
- RESET
: Resets the camera settings to the factory defaults. Language and Monitor
settings are not initialized.
EXIT
- MASK TONE : Adjust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
- RETURN
: Select this to save the PRIVACY menu settings and return to the
SPECIAL menu.
1)
…
When the SPECIAL menu screen is displayed, press the Function Setup switch so
that the arrow indicates ‘PRIVACY’.
…
…
2)
…
Set up the mode using the Function Setup switch.
- AREA
: You can select up to 12 PRIVACY areas.
- MODE
: Determines whether to use the area selected in the AREA.
- MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White,
Gray.
Operating Your Camera
DIS (Digital Image Stabilizer) : This function mitigates any picture movement due to
external factors such as wind.
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
•
Nothing appears on the screen.
▶
Check that the power cord and line connection between the camera and monitor are
properly connected.
▶
Check that you have properly connected BNC cable to the camera.
•
The image on the screen is dim.
▶
Is the lens stained with dirt? Clean your lens with soft, clean cloth.
▶
Set the monitor to the proper condition.
▶
If the camera is exposed to very strong light, change the camera position.
•
The image on the screen is dark.
▶
Adjust the contrast feature of the monitor.
▶
If you have an intermediate device, set the 75Ω / Hi-z properly.
•
The camera is not working properly, and the surface of the camera is hot.
▶
Check that you have properly connected the camera to an appropriate power source.
•
The SENS-UP function does not work.
▶
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶
Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
•
The Motion Detection function does not work.
▶
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.
•
Color is not correct.
▶
Check the setting of WHITE BAL SETUP menu.
•
The screen flickers continually.
▶
Check that direction of camera turns toward the Sun.
•
When coaxial communication is not available:
▶
Make sure that the camera and monitor are installed within the recommended distance.
▶
Use the video amplifier equivalent to coaxitron if the recommended installation distance
is exceeded.
•
As the DIS function uses the digital zoom, the camera's resolution will decrease.
•
DIS doesn’t operate when background illumination is too low.
•
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
Notes
LANGUAGE : You can select the menu language according to your requirements.
- NTSC : Korean, English, French, Spanish, Japanese, Portuguese, Taiwanese
- PAL : English, Chinese, German, Italian, French, Spanish, Russian, Czech, Polish,
Romanian, Serbian, Swedish, Danish, Turkish, Portuguese
RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP
menu.
