Samsung SCD-2020R Series, Руководство пользователя

Страница: 21 / 40

English_21
●
SETUP
n
n
o
If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by adjusting
the SENS-UP level. (x2 ~ x512)
Note that the higher the SENS-UP level, the brighter the screen, but the more likely it is that an
after-image will appear.
Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
sens-up level is increased, this is normal.
WHITE BALANCE (WHITE BAL.)
Use the White Balance function to adjust the screen color.
When the SETUP menu screen is displayed,
select ‘White Bal.’ by using the Function
Setup switch so that the arrow indicates
‘White Bal.’.
Select a desired mode using the Function
Setup switch.
※ Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1,700°K and 11,000°K.
OUTDOOR : Select this when the color temperature is between 1,700°K and
11,000°K.(sodium light inclusion)
INDOOR : Select this when the color temperature is between 4,500°K and 8,500°K.
MANUAL : Select this to fi ne-tune White
Balance manually. Set White
Balance fi rst by using the ATW
or AWC mode. After that switch
to MANUAL mode, fi ne-tune the
White Balance and then press
the Function Setup switch.
AWC → SET : To fi nd the optimal luminance level for the current environment,
point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.
M



1.
2.
y
y
y
y
y
MAIN SETUP
1.LENS SHADE OFF
2.EXPOSURE
䯝 3.WHITE BAL ATW
4.SSDR OFF
WB MANUAL
䯝 RGAIN
IIIIIIIIIIIIIIII
Â
IIIIIIIIIIIIII
529
BGAIN IIIIIIIIIIIIIIII
Â
IIIIIIIIIIIIII 532
Press SET to Return