background image

safety precautions

CAUTION

RISK OF ELECTRIC SHOCK.  

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS  

INSIDEREFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol indicates that dangerous voltage consisting a risk of electric shock is present 

within this unit.

This symbol indicates that there are important operating and maintenance instructions in 

the literature accompanying this unit.

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance  
with the installation instructions.
If this power supply is used at 240V ac, a suitable plug adapter should be used.

WARNING

1

.  Be sure to use only the standard adapter that is specified in the specification sheet.  

 

Using any other adapter could cause fire, electrical shock, or damage to the product.

2

.  Incorrectly connecting the power supply or replacing battery may cause explosion,  

 

fire, electric shock, or damage to the product.

3

.   Do not connect multiple cameras to a single adapter. Exceeding the capacity may  

 

cause abnormal heat generation or fire.

4

.  Securely plug the power cord into the power receptacle. Insecure connection may  

 

cause fire. 

5

.  When installing the camera, fasten it securely and firmly. A falling camera may cause  

 

personal injury. 

6

.  Do not place conductive objects (e.g. screwdrivers, coins, metal things, etc.) or  

 

containers filled with water on top of the camera.  

 

Doing so may cause personal injury due to fire, electric shock, or falling objects. 

7

.  Do not install the unit in humid, dusty, or sooty locations.  

 

Doing so may cause fire or electric shock. 

8

.  If any unusual smells or smoke come from the unit, stop using the product.  

 

In such case, immediately disconnect the power source and contact the service  

 

center. Continued use in such a condition may cause fire or electric shock.

9

.  If this product fails to operate normally, contact the nearest service center.  

 

Never disassemble or modify this product in any way. (SAMSUNG is not liable for  

 

problems caused by unauthorized modifications or attempted repair.)

10

. When cleaning, do not spray water directly onto parts of the product.  

 

Doing so may cause fire or electric shock.

01-SCC_B9221_NA-ENG.indd   2

2008-03-10   오후 2:06:45

Содержание SCC-B9221 - IR Bullet Camera













Отзывы: