Samsung SCC-B5366l, Руководство пользователя

Страница: 24 / 142

24 – DIGITAL COLOR DOME CAMERA
How to use OSD Menu
ATW1 (Auto Tracing White Balance mode
1): The camera can automatically adjust the
color temperature in real time, according to
the ambient conditions. The color temperature
ranges from approx. 2500K to 9300K.
ATW2 : The color temperature ranges from
approx. 2,000K to 10,000K.
AWC ( Auto White Balance Control): If you
press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.
3200K : Set color temperature to 3200K
5600K : Set color temperature to 5600K
RED : Adjusts the strength of the red color.
BLUE : Adjusts the strength of the blue color.
R-GAIN / B-GAIN : Enables you to set the current
color temperature manually.
BRIGHTNESS : Select a brightness level in
switching from setting in DAY mode to setting in
NIGHT mode.
DIGITAL ZOOM [ON/OFF]
You can set the digital zoom factor and position.
If you press the
SETUP switch with the DIGITAL
ZOOM function set to ON , you will see the
appropriate screen.
When the zoom factor and position are defi ned,
the digital zoom function will operate.
•
•
•
•
•
–
–
–
–
❖
‹ DIGITAL ZOOM ‹
RATIO [X1.0]
< LOCATION >
- LOCATION : If you press the SETUP switch in the
condition where the image is enlarged as much as the
ratio setting, you can watch an invisible area of the
effective screen as well using the
cdef
switch.
Note :
If the digital zoom factor is set to larger than 1x, the FENCE
function will be deactivated.
The
DIGITAL ZOOM
function enlarges the pixel itself, which can
cause deterioration of the quality.
DETAIL [0~3]
Controls the horizontal or vertical distinction.
V-SYNC [INT, LINE]
Select the vertical sync mode for INT or LINE .
If you select INT , the camera will use the internal
synchronization.
If selecting
LINE , the camera will use the external
power source frequency for the synchronization.
You can adjust the
LL-PHASE .
Note
:
Use of DC 12V will fi x V-SYNC to INT , which can not be
changed.

–
❖
❖

–
❖
❖
❖
❖

❖
