8
ENG
9
2. Switch 2 (LSS)
: This sens-up mode accumulates the image fields in memory to reduce
noise but increase the brightness and contrast rate. When this switch is set to
ON
, the
camera automatically switches to a maximum of 128 times of image acquisition speed to
implement a clear picture for darker image.
3. Switch 3 (H-REV)
: When this switch is set to
ON
, the camera image is reversed horizontally.
If you want to monitor your site using a mirror, you can use this feature to see the right
image.
4. Switch 4 (V-REV)
: When this switch is set to
ON
, the camera image is reversed vertically.
If your camera reluctantly displays the vertically reversed image, you can use this feature to
see the right image.
5. Switch 5 (BLC)
: When this switch is set to
ON
, you can view a clear image even though the
camera faces any excessive light such as sunlight and fluorescent light. When it is set to
OFF
, the subject with excessive light is not clearly shown.
6. Switch 6 (AGC)
: When this switch is set to
ON
, the camera automatically increase the
sensitivity by amplifying the video signal when the strength of the signal falls below a given
value. When any dark images are expected, use this feature.
7. Switch 7 (D/N)
: When this switch is set to
ON
, the camera automatically switches between
color and B&W according to the brightness of the vicinity.
8. Switch 8 (AWB)
: This switch adjusts white balancing. When this switch is set to
ON
, this
camera operates in ATW mode, and in case of
OFF
, this camera operates in AWC mode.
ATW (Auto Tracking White Balance): The color temperature is automatically adjusted according to the
environmental change. (Approx. 2000°K to 11,000°K)
AWC (Auto White Balance Control): It stores the color temperature just when the switch is changed to
OFF
. Accordingly color temperatures are adjusted by the stored value.
AB68-00647D(01)Eng.indd 9
2007-05-14 ｿﾀﾈﾄ 4:33:11
