Samsung SCC-B5310N Скачать руководство пользователя страница 2

2

3

This symbol indicates high voltage 

is present inside. It is dangerous to 

make any kind of contact with any 

inside part of this product. 
This symbol alerts you that important 

literature concerning operation and 

maintenance has been included with 

this product. 

To prevent damage which may result in fire 

or electric shock hazard, do not expose this 

appliance to rain or moisture.

WARNING

1.  Be sure to use only the standard adapter 

that is specified in the specification 

sheet. Using any other adapter could 

cause fire, electrical shock, or damage 

to the product

2.  Incorrectly connecting the power 

supply or replacing battery may cause 

explosion, fire, electric shock, or damage 

to the product.

3.  Do not connect multiple cameras to a 

single adapter. Exceeding the capacity 

may cause abnormal heat generation or 

fire. 

4.  Securely plug the power cord into the 

power receptacle. Insecure connection 

may cause fire. 

5.  When installing the camera, fasten it 

securely and firmly. A falling camera may 

cause personal injury. 

6.  Do not place conductive objects (e.g. 

screwdrivers, coins, metal things, etc.) or 

containers filled with water on top of the 

camera. Doing so may cause personal 

injury due to fire, electric shock, or falling 

objects. 

7.  Do not install the unit in humid, dusty, or 

sooty locations. Doing so may cause fire 

or electric shock.

8.  If any unusual smells or smoke come 

from the unit, stop using the product. In 

such case, immediately disconnect the 

power source and contact the service 

center. Continued use in such a condition 

may cause fire or electric shock.

Safety Precautions

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE REAR 

COVER. NO USER SERVICEABLE PARTS 

INSIDE. REFER TO QUALIFIED SERVICE 

PERSONNEL.

CAUTION

RISK OF ELECTRIC 

SHOCK DO NOT OPEN

AB68-00647D(01)Eng.indd   2

2007-05-14   ソタネト 4:33:03

Содержание SCC-B5310N





















Отзывы: