background image

ENG

5

important safety instructions

1

.  Read these instructions.

.  Keep these instructions.

3

.  Heed all warnings.

4

.  Follow all instructions.

5

.  Do not use this apparatus near water.

6

.  Clean only with dry cloth.

7

.   Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8

.   Do not install near any heat sources such as radiators, heat registers, or other apparatus 

(including amplifiers) that produce heat.

9

.   Do not defeat the safety purpose of the polarized or grounding-type plug.  

A polarized plug has two blades with one wider than the other.  

A grounding type plug has two blades and a third grounding prong.  

The wide blade or the third prong is provided for your safety.  

If the provided plug does not fit into your outlet, consult an electrician for replacement of the 

obsolete outlet.

10

.   Protect the power cord from being walked on or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from the apparatus.

11

.  Only use attachments/accessories specified by the manufacturer.

1

.   Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, 

or sold with the apparatus.

13

.   Unplug this apparatus when a card is used. Use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

14

.   Refer all servicing to qualified service personnel.  

Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the 

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, 

or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be 
placed on the apparatus

02387A -SCC-B1310-NA-ENG.indd   5

2009-05-27   오후 2:54:48

Содержание SCC-B1310N






















Отзывы: