Samsung SCB-3000, Руководство пользователя

Страница: 28 / 48

COLOR CCD CAMERA User Guide
28
Operating Your Camera
3. Select a desired mode using the Function Setup button.
BLC : Adjust the area to be enhanced
then adjust the level.
HLC : Enable the user to change the level,
limit, mask color/tone and area.
SSDR : Enable the user to change the
level.
WDR : Enable the user to change the
limit, Anti rolling and level.
• Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.
• When dark, the HLC is only activated when a bright light exceeding a specific size. (In NIGHT
ONLY mode).
• The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY mode).
• Using the WDR function, select the shutter mode can be either fixed or A.FLK in the DC and
Video lens. And in the manual lens, select the shutter mode can be only ESC.
• Since the performance of the WDR function may be affected by the area of the bright part of
the screen, optimize the installation angle for the best WDR performance.
• If you increase LIMIT, the screen display may be distorted.
• If you use the VPS (Virtual Progressive Scan) function, the CCD reads differently so you can not
use WDR simultaneously. If you set VPS to ON, WDR will be automatically set to FIXED Mode.
• The use of a DC lens than the manual lens is recommended to WDR optimal performance.
• The D-ZOOM (Digital Zoom) and DIS (Digital Image Stabilization) functions are disabled if HLC
(Highlight Compensation) is enabled. (Set to “---“.)
Notes
T
1
2
3
- MODE : Indoor and outdoor backlight conditions are appropriately selected.
- ANTI ROLLING : Rolling caused around a fluorescent lamp is improved.