Samsung SC07H40**V SERIES, Руководство пользователя

Страница: 15 / 52

ENGLISH-
15
Troubleshooting
PROBLEM SOLUTION
Motor does not start.
X
Check cable, plug and socket.
X Leave to cool.
Suction force is
gradually decreasing.
X
Check for blockage and remove.
Low or decreasing
suction.
X
Please check filter and, if required, clean as illustrated in the instructions. if
filters are out of condition change them to new ones.
Cord does not rewind
fully.
X Pull the cord out 2-3 m and push down the [ ] button.
Vacuum cleaner does
not pick up dirt.
X Check hose and replace if required.
Body overheating.
X
Please check filters, if required clean as illustrated in the instruction.
Static electicity
discharge.
X
Please decrease power suction.
X This can also occur when air in the room is very dry.
Please ventilate the room to air humidity become a normal.
Thermal protector : This vacuum cleaner has a special thermostat that protects the motor in case of
its overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum
cleaner. Make sure that there is power in the socket.
To avoid electric shock, please contact a qualified electrician. Check the vacuum cleaner for possible
source of overheating such as a full dust bin, a blocked hose, pipe, or clogged filter. If these conditions
are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After
the 30 minute period, plug the vacuum cleaner back in and turn on the switch. If the vacuum cleaner
still does not run, contact a service engineer.
SC07H40@@V SERIES_3ge_00724N-10_ST.indb 15 2019-07-02 오후 2:08:25