ENGLISH
35
35
The Camcorder : Preparation
Controlling the Sound from the Built-In Speaker
✤
The Built-In Speaker works only in PLAY mode.
✤
When you use the LCD monitor for playback, you can hear the recorded sound through the Built-
In Speaker.
Follow the instructions below to decrease or mute the speaker volume while in PLAY mode.
Take the following steps to decrease/increase the volume or mute the sound while playing a
cassette on the camcorder.
1. Turn your camcorder on by setting the Power Switch to PLAY mode.
2. Press the
(PLAY/STILL) button to play the tape.
3. Once the tape is playing and you hear sound, use the Navigation Wheel to adjust the volume.
The Volume Level Display will appear on the LCD monitor.
Levels may be adjusted between 00 ~ 19. You will not hear any sound when the volume is set
to 00.
If you close the LCD while playing, you will hear no sound from the speaker.
✤
When the Multi-AV cable is connected to the camcorder, you cannot hear sound from the Built-In
Speaker and cannot adjust the volume.
✤
The sound will return when you remove the connected Multi-AV cable from the jack of your Camcorder.
0 : 0 0 : 0 0 : 0 0
5 5 min
VOL.
[ 1 1 ]
Notes
