ENGLISH
37
37
Basic Recording
Searching quickly for a desired scene (Setting the ZERO MEMORY) (SC-D375(H)/D975 only)
✤
The ZERO MEMORY function works in both
<Camera>
and
<Player>
modes.
➥
page 19
✤
You can mark a point on a tape that you want to return to following playback.
1. Set the
[Power]
switch to
[CAMERA]
or
[PLAYER]
.
2. Set the
[Mode]
switch to
[TAPE]
.
3. Press the
[ZERO MEMORY]
button on the remote control before the recording or during
playback at the point where you wish to return.
■
The time code is changed to a tape counter that is set to ZERO MEMORY with the
<
0:00:00>
(ZERO MEMORY indicator).
■
If you want to cancel the ZERO MEMORY function, press the
[ZERO MEMORY]
button
again.
4. Finding the zero position.
■
When you have finished playback, fast forward or rewind the tape in stop mode.
The tape stops automatically when it reaches the zero position.
■
When you have finished recording, set the
[Power]
switch to
[PLAYER]
and press the
[
œ
œœ
œ
(REW)]
button.
The tape stops automatically when it reaches the zero position.
5. The tape counter with the
<
>
(ZERO MEMORY indicator) disappears from the display and the tape counter is
changed to the time code.
[ Notes ]
■
In the following situations, ZERO MEMORY mode may be canceled automatically:
- At the end of the section marked with the ZERO MEMORY function.
- When the tape is ejected.
- When you remove the Battery Pack or power supply.
■
The ZERO MEMORY may not function correctly where there is a break between recordings on the tape.
œ
1
01227A SCD371 USA~042 2/1/07 9:38 AM Page 37
