Copyright© 1995-2012 SAMSUNG. All rights reserved.
7-1
Adjustment
7. Adjustment
■
After replacing an electronic part, you must make changes for each adjustment item in the
ST200/ST200F
.
■
The following table shows the necessary adjustment item for replacing each part.
■
The camera must be fixed with a tripod and levelled condition must be maintained.
1. After replacing an electronic part, you must make adjustments for each item by referring to the following table.
<Table. 7-1 Adjustment information>
2. Adjustment equipment
- AE TESTER: AE TESTER that enables
LV 12
.
- The colour temperature specification of the Light box is
5500K
.
- Infinity Collimator for PUNT adjustment
- Gray chart (18%) for FLASH & AWB, DARK BOX)
- POWER SUPPLY: 4.2V/2A
3. Adjustment program file
Save and use the program for each adjustment item on the memory card to adjust each item.
The file name for each adjustment item is the same as
“ST200_ADJ.TXT”, “ST200F_ADJ.TXT”
.
7-1 Basic guide for adjustment
MAIN PCB
TOP PCB
BARREL ASSY
CCD ASSY
FIRMWARE UPGRADE
O
X
O
O
LENS SHADING ADJ
O
X
O
O
SHUTTER CLOSE TIME ADJ
O
X
O
O
FLASH ADJ
O
O
O
O
PUNT ADJ
O
O
O
O
VERTICAL LINE ADJ
O
X
O
O
CCD DEFECT PIXEL ADJ
O
X
O
O
OIS CENTERING
O
X
O
O
SERIAL NUMBER WRITING ADJ
O
X
X
X
