Samsung S5PC100X, Руководство пользователя

Страница: 18 / 52

SMDK-C100_USER’S MANUAL_REV 0.2
4 SMDK C100 SYSTEM CONFIGURATIONS
Perform the following steps to use SMDK_C100 board:
1. Select the Clock source
Please refer to ‘CLOCK SOURCE SELECTION’
2. Set the Regulator mode
(Fixed or Controllable voltage , VDD_ARM & VDD_INT)
Please refer to ‘CONFIGURATION SWITCH DESCRIPTION IN CPU BOARD CFGB3’ ,
3. Select the Boot mode and set by configuration switches ( There are 5
boot modes)
Please refer to ‘BOOT MODE SELECTION’
4. Set the each IP which you want to use by CPU and Base boards
configuration switches
- For MMC
Please refer to ‘CONFIGURATION SWITCH DESCRIPTION IN CPU BOARD’
- For CF CARD, LCD, Audio Controller, Audio Port(IIS,AC97,PCM), UART, IrDA,
KEYPAD, Host I/F
Please refer to ‘CONFIGURATION SWITCH DESCRIPTION IN BASE BOARD’
5. Check the Connector
Please refer to ‘CONNECTORS’ , On Appendix
- JTAG, HDMI,MIPI-CSI, MIPI-DSI,USB, HS-SPI, MIPI HSI, SD/MMC, External MMC &
MOVI-NAND & CF-ATA, External OneNAND,Camera I/F-A,PMIC External ROM bus,
External MODEM I/F On CPU Board
- Component, Composite & S-video, S/PDIF, CAN2.0,Line in/ MIC in/ Speaker out,
Ethernet, UART, Camera I/F-B, ADC, MMC, xD, PWM, External SPI, TFT LCD(Non-
MIPI), Touch screen, , External LCD, External KEYPAD(QWERTY), Module 1 ~ 5
On Base Board
Configuration Switch (DIP Switch)
1
――→
2 ――→
3 ――→
4 ――→
Off(Switch Open) → On (Switch Short)
** Note :
For more detail, please refer to separated material (
☞
Switch configuration table.xls)