background image

S3C6400/6410 INSTALLATION MANUAL FOR POST PROCESSOR 

 

 

 

2

 

Preliminary product information describe products that are in development, 

for which full characterization data and associated errata are not yet available. 
Specifications and information herein are subject to change without notice.

 

 

Important Notice

The information in this publication has been carefully 
checked and is believed to be entirely accurate at 

the time of publication. Samsung assumes no 
responsibility, however, for possible errors or 

omissions, or for any consequences resulting from the 
use of the information contained herein. 

Samsung reserves the right to make changes in its 

products or product specifications with the intent to 
improve function or design at any time and without 

notice and is not required to update this 
documentation to reflect such changes. 

This publication does not convey to a purchaser of 
semiconductor devices described herein any license 

under the patent rights of Samsung or others. 

Samsung makes no warranty, representation, or 

guarantee regarding the suitability of its products for 
any particular purpose, nor does Samsung assume any 

liability arising out of the application or use of any 
product or circuit and specifically disclaims any and 

all liability, including without limitation any 
consequential or incidental damages. 

"Typical" parameters can and do vary in different 
applications. All operating parameters, including 

"Typicals" must be validated for each customer 
application by the customer's technical experts.   

Samsung products are not designed, intended, or 

authorized for use as components in systems 

intended for surgical implant into the body, for other 
applications intended to support or sustain life, or 
for any other application in which the failure of the 

Samsung product could create a situation where 
personal injury or death may occur. 

Should the Buyer purchase or use a Samsung product 
for any such unintended or unauthorized application, 

the Buyer shall indemnify and hold Samsung and its 
officers, employees, subsidiaries, affiliates, and 

distributors harmless against all claims, costs, 
damages, expenses, and reasonable attorney fees 

arising out of, either directly or indirectly, any claim 
of personal injury or death that may be associated 

with such unintended or unauthorized use, even if 
such claim alleges that Samsung was negligent 

regarding the design or manufacture of said product

 

 
S3C6400/6410 RISC Microprocessor 
Installation Manual for Post Processor 

Copyright 

©

 2008 Samsung Electronics Co.,Ltd.   

All rights reserved. No part of this publication may 

be reproduced, stored in a retrieval system, or 
transmitted in any form or by any means, electric or 

mechanical, by photocopying, recording, or 
otherwise, without the prior written consent of 

Samsung Electronics Co.,Ltd. 

Samsung Electronics Co., Ltd. 
San #24 Nongseo-Dong, Giheung-Gu 

Yongin-City Gyeonggi-Do, Korea 
446-711 

 

Home Page: 

http://www.samsungsemi.com/

 

E-Mail:  [email protected] 
 

 
Printed in the Republic of Korea

Содержание S3C6400












Отзывы: