S3C6400/6410 INSTALLATION MANUAL FOR POST PROCESSOR
10
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
3
Test Post Processor Driver
In this Chapter, you will understand the following:
z
Test Procedure for S3C6400/6410 Post Processor
3.1
Device node
Post Processor driver’s node name is “s3c-pp”.
Major number is 10.
Minor number is 253.
If your filesystem doesn’t have “s3c-pp” nod, please make post processor’s nod using below command
/ $ mknod s3c-pp 10 253
FIGURE . Post Processor device node
3.2
Test application
Usage is like below.
FIGURE . Usage of the Post Processor
