background image

36

Specifications

Chapter  07

General

Model Name

S27C39*

S32C39*

Size

68.4 cm

80.1 cm

Display area

597.88 mm (H) x 336.31 mm (V)

698.4 mm (H) x 392.85 mm (V)

Pixel Pitch

0.311 mm (H) x 0.311 mm (V)

0.363 mm (H) x 0.363 mm (V)

Maximum Pixel Clock

148 MHz

Power Supply

AC100-240V~ 50/60Hz
Based on the AC voltage of the adapter. For the DC voltage of the product, 
refer to the product label.

Signal connectors

HDMI, DisplayPort

Environmental 
conditions

Operating

Temperature: 10 °C – 40 °C (50 °F – 104 °F)
Humidity: 10 % – 80 %, non-condensing

Storage

Temperature: -20 °C – 45 °C (-4 °F – 113 °F)
Humidity: 5 % – 95 %, non-condensing

 

Plug-and-Play
This product can be installed and used with any Plug-and-Play compatible systems. Two-way data 
exchange between the product and PC system optimises the product settings. Product installation 
takes place automatically. However, you can customise the installation settings if desired.

 

Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) 
may be brighter or darker on the LCD panel. This does not affect product performance.

 

The specifications are subject to change without notice to improve quality.

 

For detailed device specifications, visit the Samsung website.

Содержание S27C390EAE









































Отзывы: