9
Installation
Attaching the Stand
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
―
Disassembly is the reverse order of assembly.
1
2
Put the stand base onto the stand neck as the
direction shown in the figure. Check that the
stand neck is firmly connected to avoid injury
caused by falling of the base.
Tightly fasten the connecting screw at
the bottom of the stand base. Fasten the
large screw in the middle for assembly.
3
4
5
Push the assembled stand into the main body in the
direction of the arrow as shown in the figure.
Stand up the monitor as shown in the figure.
After installing the stand, place the
product upright.
Caution
Do not arbitrarily remove the panel
film. If not observed, the warranty
service may be restricted.
Preparations
Chapter 02
