safety information
_5
performance and also
prevents overloading house
wiring circuits, which could
cause a fi re hazard from
overheated wires.
• If the wall socket is loose, do
not insert the power plug.
- There is a risk of electric
shock of fi re.
• Do not use a cord that
shows cracks or abrasion
damage along its length or
at either end.
• Do not bend the power cord
excessively or place heavy
articles on it.
• Do not use aerosols near the
refrigerator.
- Aerosols used near the
refrigerator may cause an
explosion or fi re.
• This refrigerator must
be properly installed
and located in
accordance with the
manual before it is
used.
• Connect the power plug in
proper position with the cord
hanging down.
- If you connect the power
plug upside down, wire can
get cut off and cause fi re or
electric shock.
• Make sure that the power
plug is not squashed or
damaged by the back of the
refrigerator.
• When moving the
refrigerator, be careful not
to roll over or damage the
power cord.
- This constitutes a fi re
hazard.
• The appliance must be
positioned so that the plug is
accessible after installation.
• The refrigerator must
be grounded.
- You must ground the
refrigerator to prevent any
power leakages or electric
shocks caused by current
leakage from the refrigerator.
• Never use gas pipes,
telephone lines or other
potential lightening rods as
ground.
- Improper use of the ground
plug can result in electric
shock.
• If the power cord is
damaged, have it
DA99-02291A-16.indd 5
DA99-02291A-16.indd 5
14. 7. 16.
8:49
14. 7. 16.
8:49