4_
safety information
SEVERE WARNING
SIGNS FOR
TRANSPORTATION
AND SITE
• When transporting and
installing the appliance,
care should be taken to
ensure that no parts of
the refrigerating circuit
are damaged.
- Refrigerant leaking from the
pipe work could ignite or
cause an eye injury. If a leak
is detected, avoid any naked
fl ames or potential sources
of ignition and air the room
in which the appliance is
standing for several minutes.
• In order to avoid the creation
of a fl ammable gas-air
mixture if a leak in the
refrigerating circuit occurs,
the size of the room in which
the appliance may be sited
depends on the amount of
refrigerant used.
• Never start up an appliance
showing any signs of
damage. If in doubt, consult
your dealer. The room where
the refrigerator will be sited
must be 1m³ in size for every
8g of R-600a refrigerant
WARNING
inside the appliance. The
amount of refrigerant in your
particular appliance is shown
on the identifi cation plate
inside the appliance.
SEVERE WARNING
SIGNS FOR
INSTALLATION
• Do not install the
refrigerator in a damp
place or place where it
may come in contact
with water.
- Deteriorated insulation of
electrical parts may cause
an electric shock or fi re.
• Do not place this refrigerator
in direct sunlight or expose
to the heat from stoves,
room heaters or other
appliance.
• Do not plug several
appliances into the same
multiple power board.
The refrigerator should
always be plugged into its
own individual electrical
which has a voltage rating
that matched the rating
plate.
- This provides the best
WARNING
DA99-02291A-16.indd 4
DA99-02291A-16.indd 4
14. 7. 16.
8:49
14. 7. 16.
8:49