setting up
_17
01
s
E
tting
u
P
setting up your side-by-side
refrigerator
instaLLing thE watEr DisPEnsEr LinE (oPtionaL)
Connecting the water line to the refrigerator
1. Remove the cap from water line on the unit and insert compression nut to the water line on
the unit after disassembling from provided water line.
2. Connect both water line from the unit and water line in the kit
3. Tighten the compression nut onto the compression fitting. Be careful no gap between two items.
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to
make sure you get a snug, leak-free connection.
Before being used, the leakage in these places should be examined
• Samsung Warranty does not cover WATER LINE INSTALLATION.
• It’ll be done at customer’s charge unless the retail price includes installation cost.
• Please contact Plumber or Authorized Installer for the installation if needed.
• If Water leakage occurs due to improper installation, Please contact installer.
remove
cap
Water line
from unit
Water line
from Kit
no gap
loosen a
CAUTION
DA99-01745T(EN)-GGH-0.4.indd 17
2010.12.16 10:20:27 AM
