Samsung RSA1WTVG, Руководство пользователя

Страница: 4 / 34

0 4_ safety information
•
In order to avoid the cr eation of a flammable gas-air mixtu r e if a leak in the
r efrigerating ci r cuit occurs, the size of the r oom in which the appliance may be sited
depends on the amount of r efrigerant used.
•
Never start up an appliance showing any signs of damage. If in doubt, consult your
deale r .
•
The r oom must be 1m 3 in size for every 8g of R600a r efrigerant inside the appliance.
•
The amount of r efrigerant in your particular appliance is shown on the identification
plate inside the appliance.
•
Please dispose of the packaging material for this p r oduct in an envi r onmentally
friendly manne r .
•
Pull the power plug out of the socket befo r e changing the interior light of the
r efrigerato r .
- Otherwise, there is a risk of electric shock.
SEVERE WARNING SIGNS
•
Do not install the r efrigerator in a damp place or place whe re it may come in contact with water .
- Deteriorated insulation of electrical parts may cause an electric shock or fi r e.
•
Do not place this r efrigerator in di r ect sunlight or expose to the heat f r om stoves, room
heaters or other appliance.
• Allow sufficient space to install the r efrigerator on a flat surface.
- If your r efrigerator is not level, the inte r nal cooling system may not work cor r ectl y .
•
Do not plug several appliances into the same multiple power boa r d. The r efrigerator
should always be plugged into its own individual electrical which has a voltage rating that
matched the rating plate.
-
This pr ovides the best performance and also p r events overloading house wiring ci r cuits,
which could cause a fi r e haza rd from overheated wir es.
•
Never unplug your r efrigerator by pulling on the power co r d. Always grip plug firmly and
pull straight out from the outlet.
- Damage to the cord may cause a short-circuit, fire and/or electric shock.
•
Make sure that the power plug is not squashed or damaged by the back of the
refrigerator.
• Do not bend the power cord excessively or place heavy articles on it.
- This constitutes a fire hazard.
•
Have the power cord repaired or replaced immediately by the manufacturer or its service
agent if power cord has become frayed or damaged.
•
Do not use a cord that shows cracks or abrasion damage along its length or at either end.
•
If the power cord is damaged, have it replaced immediately by the manufacturer or its
service agent.
• When moving the refrigerator, be careful not to roll over or damage the power cord.
• Do not insert the power plug with wet hands.
• Unplug the refrigerator before cleaning and making repairs.
• Do not use a wet or damp cloth when cleaning the plug.
• Remove any foreign matter or dust from the power plug pins.
- Otherwise there is a risk of fire.
•
If the refrigerator is disconnected from the power supply, you should wait for at least ten
minutes before plugging it back.
• If the wall socket is loose, do not insert the power plug.
- There is a risk of electric shock or fire.
• The appliance must be positioned so that the plug is accessible after installation.
safety information
WARNING
WARNING