Samsung RS54H Series, Руководство пользователя

Страница: 33 / 216

English - 33
02 OPERA
TING
3. Next, remove the fi xed cap by turning it counter
clockwise.
4. Remove the new fi lter’s protective cap and
remove the old fi lter.
5. Position and insert the new fi lter into the fi lter
housing. Slowly turn the water fi lter clockwise
90º to align with the indication mark on the cover,
locking the fi lter in position. Make sure that the
indicator is lined up with the “lock” position. Do
not over tighten.
For Exterior model
1. Shut off water supply.
2. Note the Flow direction on the fi lter.
3. Insert water supply tube into the inlet side of the
fi lter until the tube stop.
4. After inserting tube, put together the clip strongly.
The Clip fi x the tube.
5. Turn on the water and check for leaks. If leaks
occur, repeat step 1,2,3,4. If leaks persist,
discontinue use and call your supporting dealer.
6. Once you have completed this process, hold the
Ice Type button for 3 seconds to reset the fi lter
schedule.
7. Lastly, Dispense 1 L of water through water
dispenser and throw away. Make sure that water
fl ows clearly again before drinking.
A newly installed water fi lter cartridge may
cause water to briefl y spurt from the water
dispenser. This is due to air getting into the line.
It should pose no problem to operation.
Ordering replacement fi lters
To order more water fi lter cartridges, contact your
authorized Samsung dealer.
- Internal Filter - HAFIN2/EXP
- External Filter - HAFEX/EXP
1
2
3
4
5
Align the
indication
mark with
lock position
Cover fi lter
Sticker
(month
indicator)
WATER SUPPLY
INLET SIDE
PERMEAT
FLOW DIRECTION
Note :
You must also ensure
that the cut is square
and not at any sort
of angle as this could
cause a leak
DA68-02710M-06.indb 33 DA68-02710M-06.indb 33 2014. 1. 24. 10:05 2014. 1. 24. 10:05