1) Select function
1-1) Using Select button, Cool, Chill(30
℉
), and Soft Freeze(23
℉
) options can be selected in sequence. Cool option
maintains a set temperature of the refrigerator.
2) Quick Cool function
2-1) If the Quick Cool is selected, LEDs will flash 60 and Min. The count will be decreased in every minute.
2-2) To cancel this function, press Quick Cool button again or Thaw button or Select button. Otherwise, it will be
terminated 60 minutes later automatically.
2-3) After this function ends, this drawer will come back to Cool option.
2-4) A defrost cycle will be postponed until Quick Cool option is finished.
3) Thaw function
3-1)When the thaw button is pressed, LEDs will flash 4, 6, 10, and 12 in sequence and Hr.
3-2) The count will be decreased in every hour.
3-3) A cancellation of this function is same as Quick Cool function.
3-4) After this function ends, this drawer will be maintained with 30
℉.
3-5) While the compressor is on, this drawer retains a certain temperature and while the compressor is off, the defrost
heater is activated and Refrigerator Fan is on with a closed position of the damper.
1) Filter Indicator
1-1)This indicator initally lights off. The light will be on the 6th month operation. The EEPROM in the control board
counts a period of time regardless of a power failure.
1-2)To reset the counter and the light off, press Ice Type button for 3 seconds.
●
The Ice-maker is referred to the device with an automatic ice production, storage in the ice bucket and dispensing
through the ice chute.
1) Ice-maker parts
TRAY-ICE
SCREW
SUPT-RUBBER
ICE-WAKER, KIT
EJECT-MOTOR
TEST-SWITCH
LEVELING-SWITCH
GUIDE-ICE
(Lever to check ice full)
KNOB-TOUCH
ICE Full-
SWITCH
27
Operation Function
9-8) Water Filter Indicator Function
9-9) Ice-Maker Function
