English - 18
HOW TO ADJUST THE GAP
BETWEEN THE DOORS
If the gap between the refrigerator door and the
freezer door is uneven:
• Use the gap adjustor located at the top of the
refrigerator door (right side).
• Excessive force can cause the adjustor bolt to
break.
1. Remove the refrigerator
door’s hinge cover.
- Detach the hinge cover with
the door open and then close
the door once the hinge
cover has been detached.
2. Adjust the gap using a 4 mm Allen wrench (not
included).
3. Rotate the bolt clockwise (
) to widen
the gap. Rotate it counterclockwise (
) to
narrow the gap.
Adjust until the gap between the refrigerator
door and the freezer door appears even.
CAUTION
When arranging the cables, take caution not to
tear or peel off the cable coating.
HOW TO ADJUST THE GAP
BETWEEN THE REFRIGERATOR
DOOR AND THE REFRIGERATOR
BODY
If the gap between the refrigerator door and the
refrigerator is uneven :
• Use the adjustors located at the top edge of
the refrigerator, inside each door.
1. Open the door where the gap with the
refrigerator is narrower and then turn the
adjustor counterclockwise (
) until the gap
is even.
Adjustor
2. Once the gap between the door and the
refrigerator has been adjusted, turn the adjustor
nut clockwise (
) to lock the adjustor in
place.
Locking Nut
DA68-02976A-03.indb 18
14. 5. 14. �� 9:25
Содержание RH22H9010
Страница 46: ...Memo DA68 02976A 03 indb 46 14 5 14 9 25...
Страница 47: ...Memo DA68 02976A 03 indb 47 14 5 14 9 25...