Chapter 1 Before Installation
RFD01F Series Installation Manual v1.0
5
© Samsung Proprietary and Confidential
After Installing
Remove any debris produced during the work and clean up the installation site.
In the system, the laser beam light runs through the optical cable. Handle the
optical cables with care as the laser beam can seriously damage the worker’s eyes.
Make sure that worker does not damage installed cables while cleaning the system.
While cleaning the power supply device, take caution that the device does not come
in contact with foreign objects that may cause power failure.
Installation Tools
The basic tools for installation are listed in the table below. The additional tools
required for each site need to be identified and prepared during a site survey before
starting installation.
Table 2. Basic Installation Tools
No.
Name
Specification
Purpose of use
1
Torque Driver
Apply a torque range
: 10~50 lbf.in.
For fastening M6 Screw fixing
2
Screw Driver Bit
'+', No. 1
For fastening Power Connector
'+', No. 3
For fastening M6 Screw fixing
3
Screw Driver
'+', No. 1
For fastening Power Connector
'+', No. 3
For fastening M6 Screw fixing
4
Torque Wrench
Apply a torque range
: 10~50 lbf.in.(30~150 kgf
·
cm)
For fastening M6 Hex. Bolt
Apply a torque range
: 100~400 lbf
·
in (100~500 kgf
·
cm)
For fastening M10 Hex. Bolt/Nut
For fastening DIN Type
Connector
5
Adjustable Torque Wrench
Apply a torque range
: 10~50 lbf.in.(30~150 kgf
·
cm)
For fastening Optic Cable
Adapter
6
Torque Wrench Spanner Head
Hexagon Head: 0.39 in.(10 mm)
For fastening M6 Hex. Bolt
