setting up
_09
01
SETTING
u
P
The left door is fixed. To make minor
adjustments between doors, adjust only the
right door.
1.
Pull out the Convertible door (
1
) to expose the
lower hinge (
2
).
2.
Insert the supplied allen wrench (3/16”) (
3
) into
the shaft (
4
) of the lower hinge.
3.
Please adjust the height by turning the hex
wrench (
3
) clockwise (
DOWN
) or counter-
clockwise (
uP
).
When you turn the hex wrench counter-
clockwise (
), the door will move up.
1.
After adjusting the doors, insert the supplied
fastener (
6
) using a pliers (
5
) in the gap
between the hinge-grommet (
7
) and the lower
hinge (
8
). The number of fasteners you’ll need to
insert depends on the gap.
2 fastener are enclosed with the refrigerator.
The thickness of each fastener is 0.04”.
ADjuSTING THE FREEzER DRAWER
LEvEL
1.
Locate the height-adjuster (
1
) in the freezer
drawer.
Unscrew the 8 Phillips screws (
2
) slightly to
loosen the door.
2.
Loosen the controller
screw (
3
) with a Phillips
screwdriver (+).
3.
Find the best level
to align the door
slope.
•
After
adjustment,
tighten the
controller screw
(
3
) and then
philips screws.
3
1
2
3
4
Freezer Drawer
Adjustment part
1
2
3
Example) The slope is about 0.08inch (2mm) as shown below.
- Rotate the height adjuster to -2.0 to reduce the door slope.
Slope
Reference
plane
Adjustment
part
Fixed part
DA68-02481A-0.2.indb 9
2011.3.7 9:20:35 AM
