Samsung RF323TEDBSR, Руководство пользователя

Страница: 15 / 84

operating _15
02 OPERA
TING
move sequentially from -8°F to 5°F (or from -23°C
to -15°C).
Controlling the fridge temperature
The fridge temperature can be set between
34°F and 44°F (or between 1°C and 7°C) to suit
your particular needs. Press the Fridge button
repeatedly until the desired temperature is shown
in the temperature display. The temperature will
change by 1°F (or 1°C) with each press. See
below.
Fahrenheit : 37°F
➞
36°F
➞
35°F
➞
34°F
➞
44°F
➞
43°F
➞
42°F
➞
41°F
➞
40°F
➞
39°F
➞
38°F
➞
37°F.
Centigrade : 3°C
➞
2°C
➞
1°C
➞
7°C
➞
6°C
➞
5°C
➞
4°C
➞
3°C.
The temperature control process for the Fridge
works just like the Freezer process. Press the
Fridge button to set your desired temperature.
After a few seconds, the Fridge will begin
adjusting towards the newly set temperature. This
will be refl ected in the digital display.
The temperature of the Freezer, Fridge -
or Cool Select Pantry Zone may rise
when you open the doors too frequently,
or if a large amount of warm or hot food
is placed inside.
This may cause the digital display to blink. -
Once the Freezer and Fridge temperature
return to their normal set temperatures, the
blinking will stop.
If the blinking continues, you may need to
-
“reset” the Refrigerator. Try unplugging the
appliance, wait for around 10 minutes and then
plug the power cord back in.
If there is a communication error between the
-
Display and Main Controller, the Convertible
Display light may blink. If the blinking continues
for a long period of time, please contact a
Samsung Electronics Service Center.
USING THE COLD WATER DISPENSER
Push the appropriate ice type button
to select what you want dispensed.
Using the ice lever ( 1 )
Push the Ice lever dispenser ( 1 )
gently with your glass. Ice will be
released from the dispenser.
You can choose the type of ice
by pushing the cubed or crushed
button fi rst.
Using the Water lever ( 2 )
Push the Water lever dispenser ( 2 ) gently with your
glass. Water will be released from the dispenser.
Even if you push the water and Ice lever
simultaneously, the dispenser operates only
the option you selected or pushed fi rst.
Please wait 1 second before removing the cup
after dispensing water to prevent spills. Do not
pull out the lever dispenser after dispensing
ice or water. It comes back automatically.
Using the Ice & Water Dispenser together
To get Ice and water, push the Ice lever ( 1 ) fi rst
for ice, then move your glass down and press the
water dispenser lever (
2 ) for water.
Maintaining the Ice Bucket
To clean the ice bin/bucket, wash with a mild •
detergent, rinse well, and dry thoroughly it. Do
not use harsh or abrasive cleaners or solvents.
Ice is made in cubes. When you select “Crushed”,
•
the ice maker grinds the ice cubes into crushed ice.
When you select Cubed Ice after using the
•
Crushed Ice mode, a small amount of residual
crushed ice might be produced.
The ice cubes generated by the rapid ice
•
making process will look white, which indicates
they are generated normally.
As the ice maker in the refrigerator room
•
makes ice cubes even faster, move the ice
cubes from the refrigerator ice bin to the
NO ICE NO ICE
Select this if you want to Select this if you want to
turn ice maker off turn ice maker off
1
2
Recommend Temp (Fridge) : 37°F (or 3°C ) Recommend Temp (Fridge) : 37°F (or 3°C )
DA68-02603A.indb 15 DA68-02603A.indb 15 2012.5.30 1:27:6 PM 2012.5.30 1:27:6 PM