English - 10
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to “Leveling the Refrigerator” on page 14.
Flat-blade screw
driver (-)
Control Lever
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
ACCESSORIES AND REQUIRED
TOOLS
The following accessory is included with your
refrigerator:
Shim Hinge Middle 2 EA
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
screwdriver (+)
Flat-blade screw
driver (-)
Socket wrench
(13/32”) (10 mm)
Pliers
Allen wrench
(3/16”) (5 mm)
DA68-03029A-07.indb 10
2015. 11. 6. �� 11:34
Содержание RF28HDED Series
Страница 42: ...Memo DA68 03029A 07 indb 42 2015 11 6 11 35 ...
Страница 43: ...Memo DA68 03029A 07 indb 43 2015 11 6 11 35 ...
Страница 127: ...Note DA68 03029A 07 indb 41 2015 11 6 11 36 ...