English
4.
Gently draw up the clamp in several steps.
To prevent finger injuries, do not apply a
sudden force to the clamp.
5.
Pull up the clamp to remove.
6.
Open the door 90 degrees. While holding
the door, pull up and remove the top
hinge. Be careful not to damage the
connector wires when you remove the
hinge.
7.
Gently pull up the door vertically to
remove. Do not apply excessive force
to the door. The door may fall, causing
physical injury.
8.
Lay the door down on a flat surface.
9.
Repeat steps 1-8 for the other door,
except for step 3. There is no water tube
on the right side door.
- Step 2 does not apply to the models
without the Showcase door.
RF8000B_User-servicing-manual_26lang.indb 7
2021-12-09 10:29:15