English
To replace the hinges
Disconnect the water line
CAUTION
• Make sure the water hoses are connected with matching colours. (only for Dispenser
model)
• To prevent water leaks, each water hose must be inserted fully to the centre of the
transparent coupler. (only for Dispenser model)
• Ensure that the water hose surface is not damaged. (only for Dispenser model)
Detach the fridge doors
1.
With the doors closed, use a Phillips
screwdriver to remove the screws (x3)
from the top cover. Pull up and remove the
top cover with the connectors.
2.
Disconnect the two wire connectors on the
left door. The position of the connectors
differs with the model.
CAUTION
• Do not remove both doors simultaneously.
Make sure to remove one door at a time.
Otherwise, any of the doors may fall and
cause physical injury.
• Make sure the refrigerator is off before
disconnecting the connectors.
3.
Disconnect the water tube from the
coupler on the left door as shown.
- This step does not apply to the models
without the AutoFill pitcher and the
water dispenser.
RF8000B_User-servicing-manual_26lang.indb 6
2021-12-09 10:29:14