background image

7-15

Chapter 7. Recovering the Computer

Wired LAN Related

Q1 <Wake On LAN> Function.

A <Wake On LAN> is a function that activates the system in rest mode when a sig-

nal (such as 

ping

or 

magic packet

commands) arrives from network(wired

LAN). 

To use <Wake On LAN> function

1. Click 

Start > My Computer > My Network Places > View net-

work connections

.

2. Click the right button on the touchpad over 

Local Area Connection

, and

select 

Properties

.

3. Click 

Configure...

, and select 

Power Management

tab. Select '

Allow

this device to bring the computer out of standby

', then click 

OK

.

Restart the system.

If the system in rest mode is activated when there is no received signal, use the
system after disabling <Wake On LAN> function.

Connecting wired LAN while using wireless LAN may not execute <Wake On
LAN> function. Configure wireless LAN to '

Disable

' to use <Wake On LAN>

function.

Q2 When I connected 100Mbps wired LAN and the computer exits

standby/hibernate mode, a message informing 10Mbps wired
LAN connection appears.

A When the computer exits standby/hibernate mode, restoring the network takes

about 3 seconds. When the network is restored, it operates in 100Mbps.

Содержание Q25































































































































Отзывы: