background image

English

Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any 

third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement 

to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has 

been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied 

when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across 

the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly 

documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, 

reading or copying.

7.  Additional Terms. 

“Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional 

permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid 

under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the 

entire Program remains governed by this License without regard to the additional permissions. 

When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. 

(Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions 

on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision 

of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this 

License with terms:
a)   Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or

b)  Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by 

works containing it; or

c)  Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as 

different from the original version; or

d)  Limiting the use for publicity purposes of names of licensors or authors of the material; or

e)  Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or

f)  Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with 

contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and 

authors.

 

All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or 

any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If 

a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material 

governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. 

If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of theadditional terms that 

apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the 

form of a separately written license, or stated as exceptions; the above requirements apply either way.

8.  Termination. 

You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is 

void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). 

However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until 

the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by 

some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the 

copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for 

any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. 

Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this 

License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under 

section 10.

9.  Acceptance Not Required for Having Copies. 

You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely 

as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance.  

However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do 

not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so.

10.  Automatic Licensing of Downstream Recipients. 

Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that 

work, subject to this License. You are not responsible for enforcing compliance by third parties with this License.  

An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or 

merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the 

work also receives whatever licenses to the work the party’s predecessor in interest had or could give under the previous paragraph, plus a right to 

possession of the You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you 

may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a 

cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program 

or any portion of it.

11.  Patents. 

A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based.  

The work thus licensed is called the contributor’s “contributor version”. 

A contributor’s “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, 

that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that 

would be infringed only as a consequence of further modification of the contributor version.  

For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. 

Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent claims, to make, use, sell, 

offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a “patent 

BN68-02119C_Eng.indb   57

2009-04-09   오후 3:18:15

Содержание PS50B560T7W



































































Отзывы: