English - 0
Picture Options
You can set detailed picture settings.
1
Press the
MENU
button to display the menu.
Press the
ENTER
button to select
Picture
.
Press the ▲ or ▼ button to select
Picture Options
, then
press the
ENTER
button.
4
Select the required option by pressing the ▲ or ▼ button,
then press the
ENTER
button.
5
When you are satisfied with your setting, press the
ENTER
button.
Press the
EXIT
button to exit.
➢
In
PC
mode, you can only make changes to the
Colour Tone
,
Size
and
Screen Burn Protection
from among the items in
Picture Options
.
Colour Tone: Cool/Cool1/Normal/Warm1/Warm
➢
When the picture mode is set to
Dynamic
or
Standard
,
Warm1
and
Warm
cannot be selected.
Size: Auto Wide/1:/Wide Zoom/Zoom/4:/Just Scan
You can select the picture size which best corresponds to your
viewing requirements.
−
Auto Wide
: Expanding and pulling up the picture from 4:3 to
16:9 ratio.
−
1:
: Sets the picture to 16:9 wide mode.
−
Wide Zoom
: Magnify the size of the picture more than 4:3.
Move the screen up/down using the ▲ or ▼ button after
selecting the
by pressing the ► or
ENTER
button.
−
Zoom
: Magnify the size of the picture vertically on screen.
−
4:
: Sets the picture to 4:3 normal mode.
−
Just Scan
: Use this function to see the full image
without any cutoff when HDMI(720p/1080i/1080p) or
Component(1080i/1080p) signals are input.
After selecting Just Scan in HDMI (100i/100p) or
Component (100i/100p) mode
: Press the ◄ or ► button
to select , then press the
ENTER
button. Press the ▲, ▼, ◄ or ► button to move the picture
up, down, left and right.
Reset
: Press the ◄ or ► button to select
Reset
, then press the
ENTER
button. You can initialize
the setting.
➢
With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off
or a specific colour appears on the screen.
➢
For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)
connection of 50 and 60Hz, only the input source is supported.
➢
You can change the picture size simply by pressing the
P.SIZE
button on the remote control.
➢
Depending on the input source, the picture size options may vary.
➢
The items available may differ depending on the selected mode.
➢
When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
➢
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Continued...
Flesh Tone:-15~+15
You can emphasize the pink tone in the picture.
Press the ◄ or ► button until you reach the optimal setting.
➢
Changing the adjustment value will refresh the adjusted screen.
Edge Enhancement
:
Off/On
You can emphasize object boundaries.
xvYCC: Off/On
Setting the
xvYCC
mode to On increases detail and colour space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
➢
The
xvYCC
function works only in
Component
or
HDMI
(Y, Cb, Cr) mode.
Move
Enter
Return
Auto Wide
1:
Wide Zoom
Zoom
4:
Just Scan
Size
T V
Move
Enter
Exit
Mode
: Standard
Cell Light
Contrast
0
Brightness
45
Sharpness
50
Colour
50
Tint G50 R50
Detailed Settings
More
Picture
T V
Move
Enter
Return
Colour Tone :
Normal
Size
:
Auto Wide
Screen Mode
:
1:
Digital NR :
Auto
DNle
: On
HDMI Black Level : Normal
Movie Plus
: Low
Blue only mode : Off
Screen Burn Protection
Picture Options
T V
BN68-01434D-Eng.indb 20
2008-03-10 오전 11:28:44
Содержание PS50A550
Страница 52: ...This page is intentionally left blank ...
