background image

Precaution

Samsung Electronics

1-5

1-4 Installation Precautions

1. For safety reasons, more than two people are required

for carrying the product.

2. Keep the power cord away from any heat emitting

devices, as a melted covering may cause fire or electric
shock.

3. Do not place the product in areas with poor ventilation

such as a bookshelf or closet. The increased internal
temperature may cause fire.

4. Bend the external antenna cable when connecting it to

the product. This is a measure to protect it from being
exposed to moisture. Otherwise, it may cause a fire or
electric shock.

5. Make sure to turn the power off and unplug the power

cord from the outlet before removing the product. Also
check the antenna cable or the external connectors if
they are fully unplugged. Damage to the cord may cause
fire or electric shock.

6. Keep the antenna far away from any high-voltage cables

and install it firmly. Contacting the high-voltage cable or
the antenna falling over may cause fire or electric shock.

7. When connecting the RF antenna, check for a DTV

receiving system and install a separate DTV reception
antenna for areas with no DTV signal.

8. When installing the product, leave enough space (10cm)

between the product and the wall for ventilation
purposes.
A rise in temperature within the product may cause fire.

9. When moving a PDP with attached speakers, detach the

speakers first before moving the main body.
Moving the PDP main body without separating the
speakers may cause the speakers to detach, possibly
causing damage or injury. 

Содержание PS42D5SX/XEC































































































































Отзывы: