ENGLISH-
11
When the battery indicator blinks
during cleaning, poWerbot will
return to the docking station to
charge itself automatically.
automatic charging
you may command poWerbot to
recharge at the docking station
while it is in cleaning process.
recharging
manually charge poWerbot by
placing it on the docking station.
Low battery (Lo)
Steps to take if recharging is not being executed
Check the installation status of the
docking station when:
f
docking station is located in a place where
POWERbot cannot easily access
f
distance of the docking station and POWERbot is
over 5 m apart
–
It may take a long time for POWERbot to return to
the docking station for recharging
manually charge poWerbot when:
f
docking station is located in a corner
f
battery is fully exhausted
f
POWERbot is stuck by obstacles (furniture etc.)
f
POWERbot can't climb threshold near docking
station (Height of the threshold that POWERbot can
climb: about 2.0 cm and below)
f
Battery indicator blinks and "Lo" is displayed
f
POWERbot is set on Spot clean or Manual clean
mode
SR9300K_EN_DJ68-00743E-00_EU.indd 11
2016-02-03 오후 8:23:54
