Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The PDP device may interfere with an amateur radio or AM radio.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
button.
Plug & Play
is available only when the
Input
source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
or
button, then press the
ENTER
button.
Select the desired OSD (On Screen Display) language.
P
POWER
2
Selecting
Store Demo
or
Home Use
Press the
or
button, then press the
ENTER
button.
y
Select the
Home Use
mode.
Store Demo
mode is for retail
environments.
y
To return the unit’s settings from
Store Demo
to
Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold
MENU
for 5 sec.
3
Selecting an antenna
Press the
or
button, then press the
ENTER
button.
Select
Air
,
Cable
or
Auto
.
4
Selecting a channe
l
Press the
or
button, then press the
ENTER
button. Select the channel source
to memorize. When setting the antenna source to
Cable
, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel
Auto Program
(p. 13).
✎
Press the
ENTER
button at any time to interrupt the memorization process.
5
Setting the
Clock Mode
Set the
Clock Mode
automatically or manually.
y
Auto
: Allows you to select
DST
(Daylight Saving Time) mode and time zone.
y
Manual
: Allows you to manually set the current date and time. (p. 21).
6
View the
HD Connection Guide
.
The connection method for the best HD screen quality is displayed.
7
Enjoy your TV.
Press the
ENTER
button.
If You Want to Reset This Feature...
MENU
Setup
Plug & Play
ENTER
ANT OUT
VHF/UHF Antenna
or
Cable
Power Input
!" #$%&& '
wj[`WTjiu]_TWZXX[iTWWsWYUGGG_
YWXWTW^TWYGGG㝘䟸GXaWZaX\
