English - 5
Connecting a VCR
1
Unplug the cable or antenna from
the back of the TV.
2
Connect the cable or antenna to the
ANT IN terminal on the back of the
VCR.
3
Connect an Antenna Cable between
the ANT OUT terminal on the VCR
and the ANT IN terminal on the TV.
4
Connect a Video Cable between the
VIDEO OUT jack on the VCR and
the AV IN [Y/VIDEO] jack on the TV.
5
Connect Audio Cables between the
AUDIO OUT jacks on the VCR and
the AV IN [R-AUDIO-L] jacks on the
TV.
6
Press the
SOURCE
button on the
remote control until you see the
VCR signal (see “To Select the
Source” on page 9).
Using a Video Cable
➢
If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the
TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.
➢
Each VCR has a different back panel configuration.
➢
When connecting a VCR, match the color of the connection terminal to the cable.
➢
When connecting to AV IN , the color of the AV IN [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
VCR Rear Panel
Video Cable (Not supplied)
Audio Cable (Not supplied)
Antenna cable (Not supplied)
TV Rear Panel
5
3
4
Connect an Optical Cable
between the DIGITAL AUDIO OUT
(OPTICAL) jack on the TV and the
Digital Audio Input (OPTICAL) jacks
on the Digital Audio System.
When a Digital Audio System is
connected to the DIGITAL AUDIO
OUT (OPTICAL) jack: Decrease
the volume of the TV, and adjust
the volume level with the system’s
volume control.
What is OPTICAL?
• An optical cable converts an
electric signal into an optical
light signal, and transmits it
through glass fibers. S/PDIF is
a transmission system of digital
audio in the form of a light wave
that uses a glass conductor.
Connecting a Digital Audio System
➢
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
➢
Each Digital Audio System has a different back panel configuration.
➢
When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a
DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such
as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box
directly to an Amplifier or Home Theater, not the TV.
TV Rear Panel
1
Digital Audio System
Optical Cable (Not supplied)
BN68-02444A.indb 5
2009-09-10 �� 9:51:24
Содержание PN42B400P3D
Страница 11: ...BN68 02444A indb 11 2009 09 10 9 51 28...
Страница 22: ...BN68 02444A indb 22 2009 09 10 9 51 40...
Страница 33: ...Cette page est laiss e intentionnellement en blanc BN68 02444A indb 33 2009 09 10 9 51 53...
Страница 34: ...Cette page est laiss e intentionnellement en blanc BN68 02444A indb 34 2009 09 10 9 51 53...