Troubleshooting
Samsung Electronics
4-17
4-2-2 How to Access Service Mode
1. General Remote
To Enter:
→
→
→
→
→
(Interval between key strokes: less than 3 sec)
To Exit:
→
2. Factory Remote
To Enter:
→
→
→
(Interval between key strokes: less than 3 sec)
To Exit:
→
Press the Factory key twice with a key stroke interval of more than 1 second (Pressing once enters Aging Mode)
3. Settings when entering Factory mode
- Sharp Screen (Dynamic), Color Tone (Cool1), Factory (Dynamic CE Off), DNIe(Off)
4. Adjustment Procedures
- Channel
▲ ▼
Key : Select an item.
- Volume
◀▶
Key : Adjust the value up or down.
- MENU Key
: Save the changes to the EEPROM and return to the higher-level mode.
- Using the Numeric (0~9) keys, you can select a channel.
- Using the SOURCE key, you can switch AV modes.
5. Initial SERVICE MODE DISPLAY State
※
The version of the firmware displayed at the bottom of the screen may differ and the firmware is subject to change for the
improvement of product functions.
※
If you have adjusted the settings in Service Mode, you have to reset the product.
※
If you exit Service Mode without reset, DNIe vlaue keeps Off regardless of setting up the user.
POWER OFF
MUTE
POWER ON
POWER OFF
POWER ON
POWER OFF
POWER ON
1
8
2
POWER ON
INFO
FACTORY Key
1. ADC
2. ADC Target
3. ADC Result
4. Option Byte
5. Adjust
6. White Balance
7. W/B Movie
8. EPA standard
9. FBE3
10. VDEC
11. Scaler
12. Sharpness
13. PE
14. Sound
15. Dynamic Contrast
16. PDP Option
17. Expert Settings
18. Expert D-Settings
19. Expert Gray Scale
20. Expert C-Space
21. Expert Others
22. CHECKSUM
0x0000
23. Reset
T-CRLAUSC-00xx
Dec 29 2007
PN42A450
EDID FAIL
Option :
Содержание PN42A450P1D
Страница 9: ...1 6 Samsung Electronics MEMO ...
Страница 15: ...2 6 Samsung Electronics MEMO ...
Страница 65: ...6 6 Samsung Electronics MEMO ...
Страница 67: ...7 2 Samsung Electronics MEMO ...