5
EN
Installing Your Microwave Oven
Place the oven on a flat, level surface that strong enough to
safely bear the weight of the oven.
Never
block the air vents as the oven may overheat and
automatically switch itself off. It will remain inoperable until it has
cooled sufficiently.
For your personal safety, plug the cable into a 3-pin, 230 Volt,
50Hz, AC earthed socket. If the power cable of this appliance is
damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
Do not
install the microwave oven in hot or damp surroundings
like next to a traditional oven or radiator. The power supply
specifications of the oven must be respected and any extension
cable used must be of the same standard as the power cable
supplied with the oven. Wipe the interior and the door seal with a
damp cloth before using your microwave oven for the first time.
Checking Parts
Unpack your oven and check to make sure that you have all the parts shown
here. If any part is missing or broken, call your dealer.
The white plastic tubing on the crumb tray and wire rack must not
be removed.
1.
When you install your oven, make sure there is adequate
ventilation for your oven by leaving at least 10 cm (4
inches) of space behind and, on the sides of the oven
and 20 cm (8 inches) of space above and 85 cm(33
inches) of the floor.
2.
Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3.
This microwave oven has to be positioned so that plug is
accessible.
20cm
above
10cm
behind
10cm
on the side
85cm of
the floor
microwave oven
glass tray
roller guide ring
metal wire rack
(DE97-00318B)
tray baking
(DE97-00327A)
instruction manual
card warranty
Glove oven
(DE63-00123B)
wnZYWWohjTWZX_XhluUGGwG\GG{ SGq GX\SGYWW`GGXaYYGwt
