Samsung PE43H4000A, Руководство пользователя

Страница: 83 / 185

English - 37
English
Issues Solutions and Explanations
Your settings are lost after 30
minutes or every time the TV is
turned off.
• If the TV is in the
Store Demo
mode, it will reset audio and picture settings every 30 minutes. If you want to
change the settings from
Store Demo
mode to
Home Use
, press the
SOURCE
button to select
TV
mode,
and go to
MENU
→
Support
→
Use Mode
.
You have intermittent loss of audio
or video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
You see small particles when you
look closely at the edge of the
frame of the TV.
• This is part of the product’s design and is not a defect.
The PIP menu is not available. • PIP functionality is only available when you are using a HDMI or components source.
You turned the TV off 45 minutes
ago, and it turned on again.
• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware downloaded whilst
your watching TV.
The message “ Scrambled Signal ”
or “ Weak or No Signal ” appears.
• If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.
• If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.
There are recurrent picture/sound
issues.
• Check and change the signal/source.
A reaction may occur between the
rubber cushion pads on the base
stand and the top finish of some
furniture.
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
The message “ This file may not
be playable properly. ” appears.
• This may appear because of high bit rate of content. Content generally will play but could experience some
playability issue.
✎ You can keep your TV in optimum operating condition by upgrading to the latest firmware (www.samsung.com
→
support) by USB.
[PH4000-RU]BN68-05792L-00L04.indb 37 2014-02-03 7:22:07