34
MEET ME PAGE
•
Lift the handset.
•
Press the Meet Me Page (
MMPG
) button or dial
54
.
•
Dial the desired zone number.
•
After the attention tone, instruct the paged person to dial
56
.
•
Press
WAIT
or
TRANSFER
.
•
Remain off-hook until the person dials
56
from any phone.
•
The paged person will be automatically connected with you.
CALL PARK AND PAGE
When you have an outside call for someone who is not at his/her desk, you can
park the call prior to paging. There are two different methods:
MANUAL PARK ORBITS
•
While in conversation, press the
PARK
button.
•
Entered a desired orbit number (
0-9
), if the orbit number is busy dial another
orbit number. Display users can press
to automatically place the call in any
available orbit number and see the number in the display.
•
Remember the selected orbit number.
•
Replace the handset when finished.
•
Lift the handset and make a page announcement as previously described
(example:“John Smith park two”).
To retrieve a parked call from orbit:
•
Press the
PARK
button and dial the announced orbit number (
0-9
).
•
You will be connected to the parked call.
NOTES:
1.
You must have a
PARK
button or park access code to retrieve and place calls
in park orbits.
2.
If the parked call is not retrieved within a pre-programmed period of time, it
will recall your keyset and have a slow flashing amber light. You cannot park
and page intercom calls.
3.
If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
button before you begin dialing.
AUTOMATIC PARK WITH PAGE BUTTON
•
While in conversation, press the
PAGE
button. The call is automatically parked
at your station.
•
Receive page tone and dial a desired page zone number.
•
Make announcement indicating your extension number or the line number.
Hang up.
5121d_keyset.qxp 5/9/2006 10:47 AM Page 40
