Samsung OfficeServ 7200, Руководство по установке, Страница: 46 / 93

CHAPTER 3. Mounting and Replacing Modules OfficeServ 7200 Installation guide/Ed.00
Page 3-14 © SAMSUNG Electronics Co., Ltd.
The Procedure for mounting the interface Module to each slot is as follows:
1) Check the exterior of the interface Module for any damages.
2) Align each Interface Module to the guardrails of the universal slot of the
OfficeServ 7200 basic Chassis or expansion Chassis, and slide the Interface
Module into the slot.
Figure 3.14 Mounting Interface Module to Slot
3) Push the front panel lever of the interface Module until the Module is
completely inserted into the OfficeServ 7200 main Module port.
Figure 3.15 Inserting Control Module into the Main Module port