With Warning Tone
When the barge-in with tone option is set, the barging-in keyset has its microphone on and the barged-in on
station receives an override display. A double burst of warning tone sounds and repeats every ten seconds.
This feature does not work from single line sets.
Without Warning Tone
When the barge-in without tone option is set, the barging-in keyset has its microphone muted and the
barged-in on station does not receive an override display. This feature does not work from single line sets.
Trunk Monitor or Service Observing
This feature allows the user who barged-in to retain the trunk call after the original station has hung up.
WARNING:
BARGE-IN WITHOUT TONE MAY VIOLATE STATE OR FEDERAL LAWS CONCERNING THE RIGHT TO
PRIVACY. SAMSUNG TELECOMMUNICATIONS AMERICA IS IN NO WAY RESPONSIBLE FOR THE POSSIBLE MIS-
USE OF THIS FEATURE.
EXTERNAL MUSIC INTERFACES
The OfficeServ 7100 MP10a provides one input for connecting to customer provided external music sources.
This source can be used to provide background music, or any of the varied Music On Hold (MOH) uses.
EXTERNAL PAGE INTERFACES
The OfficeServ 7100 MP10a provides one external page output and two zone control relays. Common relays
are shared between external page zones and common bell feature.
FLASH KEY OPERATION
While a user is on an outside line, pressing the FLASH key will send a timed disconnect signal to the central
office or PBX. This is used for custom calling features on C.O. lines or in conjunction with CENTREX/PBX oper-
ation. System programming allows individual flash times for C.O. and PBX lines. When C.O. or PBX flash is not
required, setting the timers for two seconds releases the existing call and returns dial tone to make a new call.
FLEXIBLE NUMBERING
System programming allows stations to have three or four digit extension numbers beginning with the digit
2 or 3. Three digit default extension numbers begin with 201 and four digit defaults begin with 2001. Station
group numbers can be three or four digits beginning with the digit 5.
Using digits other than 2, 3 or 5 will require the technician to change other default feature access codes in
the system default numbering plan. User guides may need to be modified as these are all written using the
OfficeServ 7100 default numbering plan.
GROUP BUSY SETTING
This feature provides a busy signal to intercom callers that ring to a station group when all logged-in stations
are busy. The feature is activated in MMC 601 and when set to ON setting, allows an intercom caller to hear a
busy signal when calling a station group. Upon hearing a busy the intercom caller will know that all stations
are busy and can call back.When this option is set to OFF position the intercom caller will hear ring-back tone
when all stations are busy and the call will queue for the next available station. Turning this option ON will
override the Overflow setting when the group is busy. The default setting is OFF.
4.16
Home Page
Table of Contents
