Samsung OfficeServ 7000 Series, Руководство по программированию

Страница: 444 / 487

CHAPTER 2. MMC Programming
2-406 © SAMSUNG Electronics Co., Ltd.
[846] WIP INFORMATION
This MMC sets up the WiFi phone information.
No Parameter Description Default
00 REGISTERED Shows if the terminal is registered. NO
01 LOCATED Shows if the terminal is connected to the system.
If attached, wip phone’s mode is also displayed (sip
mode or ospp mode)
DETACH
02 PHONE TYPE Shows the type of the terminal. NONE
05 IP OFFSET Location of IP pool of the terminal IP
If AP type is not Commercial AP, this option can not
be shown.
-
06 IP ADDRESS Terminal IP address 0.0.0.0
07 MAC ADDR Terminal MAC address 0000 0000 0000
08 USER ID User ID per terminal PHONE NUM
09 PASSWORD Password of terminal user 0000
10 INSERT DGT If five or more numbers are entered into the WIP
terminal, this INSERT DGT is prefixed to the
numbers, provided the entered numbers do not start
with a C.O. number, C.O. group number, LCR,
network LCR, or function code.
-
12 HO THRSH Handover Thresh Hold Value (-99~0)
Thresh Hold is a signal level which makes WLAN
phone start scanning for handover.
If this signal level is under the registered Thresh
Hold, WLAN phone will start scanning.
This parameter has a minus value but system only
displays the value without minus. (So the default
value of Thresh Hold will be shown as
70 not -70.)
70
13 HO DELTA Handover Delta Value (0~99)
DELTA means the signal level difference between AP
which includes WLAN phone and another AP. If this
signal level difference is over the registered DELTA,
WLAN phone will start to handover. In this case the
signal level of WLAN phone should be under the
Thresh Hold.
05
14 HO SCAN Handover Scan Time Value (0~99)
SCAN Time is a period of scanning for WLAN
Handover. If the signal level of WLAN phone is
under the Thresh Hold, WLAN phone will start
scanning with the registered period (=SCAN Time).
01