Samsung OfficeServ 7000 Series, Руководство по программированию

Страница: 136 / 487

CHAPTER 2. MMC Programming
2-98 © SAMSUNG Electronics Co., Ltd.
[318] DISTINCTIVE RINGING
Specifies Ring Tone (T: RING TONE) and RING CADENCE (C: CADENCE) to identify
from other rings when a call is received from a specific extension or trunk line.
In addition, this program can specify the priorities (PRI: PRIORITY) for each extension.
This priority determines which call of waiting calls has connected first if any busy line
becomes free when all member’s lines of the called extension group are busy and several
calls are waiting. (PRI: ‘1’ has the highest priority.)
No. Option Description
0 DGP TONE Specifies the ring tone of a digital phone (1-8).
1 SLT RING Specifies the ring cadence of a regular phone (1-5).
2 PRIORITY This option determines which call of waiting calls has the
highest priority to be connected if a busy line becomes free
when all members’ lines of the called extension group are
busy and several calls are waiting (1-9).
PRIORITY 1 has the highest priority.
3 VM RBACK Specifies the use of the coloring service by using a VMS
message according to extensions (YES/NO).
CONDITIONS

Digital phone identifies rings by using ring tone. If the ‘T’ of a calling party’s
extension/trunk line is specified as F-STN, ring is generated by Program 111 of the
called party’s extension. If specified as 1-8, the incoming ring is generated as the
specified tone.

Regular phones identify rings by using ring cadence. If the ‘C’ of a calling party’s
extension/trunk line is specified as F-STN, ring is generated according to the cadence
of Program 510 depending on the type of the calling parties. If specified as 1-5, the
type of calling parties is ignored and the following ring cadence is used:
At this time, the ring cadence is specified in Program 510.
DEFAULT DATA
T: F-STN
C: F-STN