6-2
Chapter 6 Dialling Features
A,B,C,D,E, and F buttons are the first six buttons on the
bottom
line of
programmable buttons on both types of phone (ITP-5021D and 5014D).
Button Description
A
Toggle between uppercase and lowercase characters when entering speed dial
names.
B
Insert “FLASH” (F)
C
Insert “PAUSE” (P)
D
Convert from the pulse dialling (mechanical) to tone dialling (electronic). If your
system uses pulse dialling C.O. lines, pressing D while entering a speed dial
number causes all subsequent digits to be sent as DTMF tones.
E
Insert “[“, character to prevent the actual phone number, or some of the digits,
from showing on the LCD panel when the speed dial number is used. Any digits
entered after the “[“ symbol are displayed as “*” only. Pressing E again inserts
the “]” character so any digits entered after the “]” character will display on the
LCD.
For example: 1234[567890 will display as 1234******, and 1234[5678]90 will
display as 1234****90
F
Input a name for a speed dial number while programming the numbers (F button
toggles between number entry and name entry during programming)
Hold
Clear a speed dial number
