Samsung OfficeServ 100
System Administration Guide
23
•
ASSIGN SPEED DIALLING BLOCKS
[MMC 606]
Up to 1,500 speed dial entries can be assigned. A total of 500 or 950 of these (depending on how
your system is programmed) can be allocated as system speed dials, and the remainder allocated
to stations as personal speed dials, with a maximum of 50 numbers per station. Consequently, the
more system speed dials that are allocated, the fewer speed dials are available for personal use.
When assigning speed dials, this MMC displays the number of system or personal blocks that are
currently assigned and also shows the number remaining to be assigned, called the ‘Free List’. This
program also allows you to delete blocks of speed dial if required.
Open customer programming and follow these instructions.
ACTION
DISPLAY
1. Press
Transfer
(or
TRSF
)
606
Display
shows
2. Press right soft key to advance cursor
3. Press the
VOLUME
keys to select SYSTEM to
program system speed dials, or EXT (extension) to
program personal speed dials
If you select EXT, go to step 5
If you select SYSTEM, press right soft key and go
to step 4
4. Enter valid number of blocks to assign (e.g.
10
)
OR
Press
the
VOLUME
keys to select and press right
soft key
OR
Press
HOLD
to delete block(s)
System returns to step 3 to make another selection
(If finished go to step 7)
5. Enter desired EXT (extension) number via keypad
(e.g.,
205
)
OR
Press
the
VOLUME
keys to make selection and
press right soft key to advance cursor
6. Enter valid number of blocks (
0–5
) to assign
(e.g.
5
)
OR
Press
the
VOLUME
keys to make selection
OR
Press
HOLD
key to delete block(s)
7. Press
Transfer
(or
TRSF
) to store and exit
OR
Press
SPEAKER
to store and advance to the
next program
FREE LIST : 60
SYSTEM : 20
FREE LIST : 60
SYSTEM : 20
FREE LIST : 60
EXT205 : 1
FREE LIST : 60
EXT205 : 5
FREE LIST : 60
SYSTEM : 10