background image

4-48 

Chapter 4 

Business Features Package                                                                                        

 

6.A SELECTED TRUNK WAS BUSY 

Pegged every time a trunk or trunk group was busy regardless of the manner in which it was 
selected (e.g. DTS key, LCR, “9”, 7xx, Trunk Group Select, Speed Dial, External Call For-
ward, DISA). 
 

7.INTERNAL CALLS COMPLETED 

These are all internal calls that were completed to any station, station group or device. 
 

8.INTERNAL CALLS NOT COMPLETED 

These are all internal calls that were not answered and resulted in the calling party hanging 
up. A call to a station group that overflows to another station is considered not answered 
whether the overflow destination did or did not answer. 
 

9.TRUNK RECALLS TO STATION 

These are trunk calls that were placed on any kind of hold and recalled a station; and also 
trunk calls that were transferred, were not answered, and recalled the transferring station. 
This includes members of the operator group that put calls on hold which then recall the op-
erator’s station. 
 

10.TRUNK RECALLS TO OPERATOR GROUP 

These are any trunk calls that recalled to the operator group. 
 

11. INTERNAL PAGE USED 

Peg count of every time internal page was accessed. 
 

12.EXTERNAL PAGE USED 

Peg count for every time external page was accessed. 
 

13.ALL PAGE USED 

Peg count of every time the All Page feature was accessed. This does not include internal or 
external page, 55+ * or PAGE *. 
 

 

 

 

 

 

 

 

 

 

 
1.GROUP 

A listing of all trunk groups assigned in the system. 
 

2.OUTGOING 

This is the number of outgoing trunk calls made using each trunk group. Pegged every time 
a member of this trunk group was used to make a valid outgoing call. A valid outgoing call 
is defined by the SMDR START TIME programmed in MMC programming. 
 

B**************************** TRUNK GROUPS ************************** 
 
1 GROUP 

2 OUTGOING 

3 BUSY 

9 0000 0000 
800 0000  0000 
801 0000  0000 

Содержание OFFICESERV 100 Series



























































































Отзывы: